SWITCH Training » AAAdot1x Lab Sim

Ensurepass Question: Acme is a small shipping company that has an existing enterprise network comprised of 2 switches;DSW1 and ASW1. The topology diagram indicates their layer 2 mapping. VLAN 40 is a new VLAN that will be used to provide the shipping personnel access to the server. For security reasons, it is necessary to restrict access to VLAN 20 in the following manner: – Users connecting to ASW1’s port must be authenticate before they are given access to the network. Authentication Read more […]

SWITCH Training » Spanning Tree Lab Sim

Ensurepass Question: The headquarter office for a cement manufacturer is installing a temporary Catalyst 3550 in an IDF to connect 24 additional users. To prevent network corruption, it is important to have the correct configuration prior to connecting to the production network. It will be necessary to ensure that the switch does not participate in VTP but forwards VTP advertisements that are received on trunk ports. Because of errors that have been experienced on office computers, all nontrunking Read more […]

SWITCH Training » VTP Lab

Ensurepass Question: The headquarter offices for a book retailer are enhancing their wiring closets with Layer3 switches. The new distribution-layer switch has been installed and a new access-layer switch cabled to it. Your task is to configure VTP to share VLAN information from the distribution-layer switch to the access-layer devices. Then, it is necessary to configure interVLAN routing on the distribution layer switch to route traffic between the different VLANs that are configured on the access-layer Read more […]

SWITCH Training » VTP Lab 2

Ensurepass Question: Acme is a small export company that has an existing enterprise network comprised of 5 switches; CORE,DSW1,DSW2,ASW1 and ASW2. The topology diagram indicates their desired pre-VLAN spanning tree mapping. Previous configuration attempts have resulted in the following issues: – CORE should be the root bridge for VLAN 20; however, DSW1 is currently the root bridge for VLAN 20. – Traffic for VLAN 30 should be forwarding over the gig 1/0/6 trunk port between Read more […]

SWITCH Training » MLS and EIGRP Sim

Ensurepass Question You have been tasked with configuring multilayer SwitchC, which has a partial configuration and has been attached to RouterC as shown in the topology diagram. You need to configure SwitchC so that Hosts H1 and H2 can successful ping the server S1. Also SwitchC needs to be able to ping server S1. Due to administrative restrictions and requirements you should not add/delete VLANs, changes VLAN port assignments or create trunk links. Company policies forbid the use of static or Read more […]

SWITCH Training » LACP with STP Sim

Ensurepass Question You work for SWITCH.com. They have just added a new switch (SwitchB) to the existing network as shown in the topology diagram. RouterA is currently configured correctly and is providing the routing function for devices on SwitchA and SwitchB. SwitchA is currently configured correctly, but will need to be modified to support the addition of SwitchB. SwitchB has a minimal configuration. You have been tasked with competing the needed configuring of SwitchA and SwitchB. SwitchA Read more […]

SWITCH Training » Practice Real SWITCH Labs with Packet Tracer

Ensurepass The title said it all. Below are the screenshots of the lab files     Files included: + MLS with EIGRP lab + LACP – STP Lab Download these lab files from certprepare.com Please say thanks to Jojo who created these lab-sims. Now you can practice with real SWITCH Lab questions.   Comments Comment pages « Previous 1 2 54 HOT EXAM! 100-105 Dumps VCE PDF 200-105 Dumps VCE Read more […]

» STP Questions 2

EnsurepassHere you will find answers to STP Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Refer to the exhibit. Based on the output of the show spanning-tree command, which statement is true? A. Switch SW1 has been configured with the spanning-tree vlan 1 root primary global Read more […]

» Share your SWITCH Experience

EnsurepassPlease share with us your experience after taking the SWITCH exam, your materials, the way you learned, your recommendations… ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Please don’t post links to copyrighted work here! HOT EXAM! 100-105 Dumps VCE PDF 200-105 Read more […]

» SWITCH FAQs & Tips

EnsurepassIn this article, I will try to summarize all the Frequently Asked Questions in the SWITCH 642-813 Exam. Hope it will save you some time searching through the Internet and asking your friends & teachers. ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; 1. Please tell me how many questions in the Read more […]

» Wireless Questions

EnsurepassHere you will find answers to Wireless Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1: Which two Lightweight Access Point Protocol (LWAPP) statements are true? (Choose two) A. Layer 3 LWAPP is a UDP / IP frame that requires a Cisco Aironet AP to obtain an IP address using DHCP. Read more […]

» Gateway Redundancy Questions

EnsurepassHere you will find answers to HSRP, VRRP and GLBP questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Quick summary: HSRP, VRRP, or GLBP is used to allow specific routers to appear as a single router to make the failover transparent to the end users. Question 1: You have just purchased a new Cisco Read more […]

» GLBP Questions

EnsurepassHere you will find answers to Gateway Load Balancing Protocol (GLBP) Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Which protocol allows for the automatic selection and simultaneous use of multiple available gateways as well as automatic failover between those gateways? A. VRRP Read more […]

» VRRP Questions

EnsurepassHere you will find answers to (VRRP) Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Note: The main difference between HSRP and VRRP is that HSRP is a Cisco proprietary protocol while VRRP is an open standard. In VRRP, the active router is referred to as the master virtual router. Question Read more […]

» HSRP Questions 4

EnsurepassHere you will find answers to HSRP Questions 4 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Which three of the following network features are methods used to achieve high availability? (Choose three) A. Spanning Tree Protocol (STP) B. Delay reduction C. Hot Standby Routing Protocol (HSRP) Read more […]

» HSRP Questions 3

EnsurepassHere you will find answers to HSRP Questions – Part 3 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Which two statements are true about the Hot Standby Router Protocol (HSRP)? (Choose two) A. Load sharing with HSRP is achieved by creating multiple subinterfaces on the HSRP routers. Read more […]

» HSRP Questions

EnsurepassHere you will find answers to Hot Standby Router Protocol (HSRP) Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Which protocol specified by RFC 2281 provides network redundancy for IP networks, ensuring that user traffic immediately and transparently recovers from first-hop failures Read more […]

» HSRP Questions 2

EnsurepassHere you will find answers to HSRP Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Three Cisco Catalyst switches have been configured with a first-hop redundancy protocol. While reviewing some show commands, debug output, and the syslog, you discover the following Read more […]

» VLAN Trunking Questions

EnsurepassHere you will find answers to VLAN Trunking Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Which statement is correct about 802.1Q trunking? A. Both switches must be in the same VTP domain. B. The encapsulation type of both ends of the trunk does not have to match. C. The native Read more […]

» Voice Support Questions

EnsurepassHere you will find answers to Voice Support Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; (Questions 1 to 4 use the same picture) Question 1: You work as a network technician, study the exhibit carefully. What is the effect on the trust boundary of configuring the command mls qos trust cos Read more […]

» VLAN Hopping Questions

EnsurepassHere you will find answers to VLAN Hopping Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 What two steps can be taken to help prevent VLAN hopping? (Choose two) A. Place unused ports in a common unrouted VLAN B. Enable BPDU guard C. Implement port security D. Prevent automatic Read more […]

» VLAN Questions 3

EnsurepassHere you will find answers to VLAN Questions – Part 3 Question 1 Refer to the exhibit. On the basis of the output generated by the show commands, which two statements are true? (Choose two) A. Interface gigabitethernet 0/1 has been configured as Layer 3 ports. B. Interface gigabitethernet 0/1 does not appear in the show vlan output because switchport is enabled. C. Interface gigabitethernet 0/1 does not appear in the show vlan output because it is configured as a trunk interface. Read more […]

» VTP Questions 2

EnsurepassHere you will find answers to VTP Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 What action should a network administrator take to enable VTP pruning on an entire management domain? A. Enable VTP pruning on any switch in the management domain. B. Enable VTP pruning Read more […]

» InterVLAN Routing

EnsurepassHere you will find answers to InterVLAN Routing questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1: Study the exhibit carefully. Both host stations are part of the same subnet but are in different VLANs. On the basis of the information presented in the exhibit, which statement is true Read more […]

» VLAN Questions 2

EnsurepassHere you will find answers to VLAN Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Refer to the exhibit. Based upon the output of show vlan on switch CAT2, what can we conclude about interfaces Fa0/13 and Fa0/14? A. That interfaces Fa0/13 and Fa0/14 are in VLAN 1 Read more […]

» EtherChannel Questions

EnsurepassHere you will find answers to EtherChannel Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Notes: The Port Aggregation Protocol (PAgP) and Link Aggregation Control Protocol (LACP) facilitate the automatic creation of EtherChannels by exchanging packets between Ethernet interfaces. The Port Read more […]

» VTP Questions

EnsurepassQuestion 1 Switch R1 and R2 both belong to the Company VTP domain. What’s true about the switch operation in VTP domains? (Choose two) A. A switch can only reside in one management domain B. A switch is listening to VTP advertisements from their own domain only C. A switch is listening to VTP advertisements from multi domains D. A switch can reside in one or more domains E. VTP is no longer supported on Catalyst switches   Answer: A B Explanation A VTP domain (also Read more […]

» VLAN Questions

EnsurepassHere you will find answers to VLAN Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 You are assigning VLANs to the ports of switch R1. What VLAN number value is an assigned to the default VLAN? A VLAN 1003 B. VLAN 1 C. VLAN ON D. VLAN A E. VLAN 0 Answer: B Question 2 What is Read more […]

» Private VLAN (PVLAN)

EnsurepassHere you will find answers to Private VLAN Questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Quick review: The main purpose of Private VLAN (PVLAN) is to provide the ability to isolate hosts at Layer 2 instead of Layer 3. As you know, a VLAN is a broadcast domain, by using PVLAN we are splitting Read more […]

» STP Questions 5

EnsurepassHere you will find answers to STP Questions – Part 5 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Quick notes: BPDU filtering: prevents the switch interfaces connected to end stations from sending or receiving BPDUs. BPDU port-guard: If any BPDU is received on a port where BPDU guard is enabled, Read more […]

» VLAN VTP STP Questions

EnsurepassHere you will find answers to VLAN, VTP, STP questions ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; If you are not sure about VLAN, VTP, STP please read my VLAN tutorial, VTP tutorial and STP tutorial. Question 1 Two switches SA and SB are connected as shown below. Given the below partial configuration, Read more […]

» Port Security Questions 2

EnsurepassHere you will find answers to Port Security Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Refer to the exhibit. Based on the running configuration that is shown for interface FastEthemet0/2, what two conclusions can be deduced? (Choose two) ! interface FastEthernet0/2 Read more […]

» Drag and Drop Questions 2

EnsurepassHere you will find answers to Drag and Drop Questions – Part 2 ch_client = “medieval25”; ch_width = 550; ch_height = 250; ch_type = “mpu”; ch_sid = “CertpreAd”; ch_color_site_link = “000000”; ch_color_title = “000000”; ch_color_border = “FFFFFF”; ch_color_text = “000000”; ch_color_bg = “FFFFFF”; Question 1 Drag the choices on the left to the boxes on the right that should be included when creating a VLAN-based implementation plan. Not all choices will be used. Answer: + reference Read more […]