[Free] Download New Updated (April 2016) Cisco 350-080 Actual Tests 291-300

Ensurepass

QUESTION 291

Which SCSI action returns a list of logical unit numbers to which additional commands may be issued?

 

A.

Read Capacity

B.

Test Unit Read

C.

Report LUNs

D.

Read

E.

Inquiry

 

Correct Answer: C

 

 

QUESTION 292

Which statement about the FCIP Tape Acceleration feature is true?

 

A.

Cisco MDS SAN-OS provides only tape write acceleration.

B.

After receiving all the data, the host-side MDS FCIP Tape Acceleration-enabled switch proxies the successful completion of the SCSI WRITE operation.

C.

Cisco SAN-OS provides increased performance of data delivery to the remote FCIP connected tape drives by using UDP over the WAN.

D.

The FCIP Tape Acceleration feature can be used with multilink port channels if the port channels are constructed with a port channel protocol.

E.

WRITE FILEMARKS operations are proxied by the host-side MDS FCIP Tape Acceleration-enabled switch.

 

Correct Answer: B

 

 

QUESTION 293

Which statement about the SAN Extension Tuner is true?

 

A.

The SET configuration is persistent across reboots.

B.

The virtual N Ports that are created will register the FC4 features that are supported with the name server.

C.

Only SCSI read and write commands are implemented.

D.

SET cannot be used if iSCSI is enabled.

E.

The data pattern that is used for the data that is generated between the virtual N Ports can be an all-zero pattern or an all-ones pattern. No other data patterns can be used.

 

Correct Answer: C

 

 

QUESTION 294

Which two statements about FCIP Tape Acceleration are true? (Choose two.)

 

A.

FCIP Tape Acceleration enables time stamp control on an FCIP interface.

B.

The Cisco MDS switch proxies a transfer ready to signal the host to start receiving data.

C.

FCIP Tape Acceleration uses TCP window management and a sliding window for flow control.

D.

FCIP Tape Acceleration reduces each I/O processing time by two RTT.

E.

FCIP Tape Acceleration only supports the read acceleration.

 

Correct Answer: BD

 

 

 

 

 

 

 

QUESTION 295

Refer to the exhibit. Given the displays from MDS-1 and MDS-2, which two options describe what will happen when they attempt a zone merge for VSAN 120? (Choose two.)

 

clip_image002

 

A.

The zone merge will complete with no warnings and each switch will contain three zones.

B.

The zone merge will fail because the zone set members are not identical.

C.

The zone merge will prompt the administrator to add zones ucs-1 and ucs-2 to the switches where they are missing.

D.

Zone merges are not permitted when running enhanced mode zoning.

E.

The zone merge will fail because the active zone set names are not identical.

F.

The zone merge will complete, but the administrator will be prompted to choose which zone set to make active.

 

Correct Answer: BE

 

QUESTION 296

Which of the following is an advanced networking function performed by VEM?

 

A.

QOS

B.

Snooping

C.

VSAN creation

D.

VLAN pruning

 

Correct Answer: A

 

 

QUESTION 297

Refer to the exhibit. Which three statements about the exhibit are true? (Choose three.)

 

clip_image004

 

A.

The differentiating characteristic of the Cisco Nexus 1000V Series is that it does not run Spanning Tree Protocol. This characteristic may seem to be a significant departure from other Ethernet switches, which might potentially cause catastrophic network loops. However, in reality, the Cisco Nexus 1000V Series implements a simple and effective loop- prevention strategy that does not require Spanning Tree Protocol.

B.

Because the Cisco Nexus 1000V Series does not participate in Spanning Tree Protocol, it does not respond to BPDU packets, nor does it generate them. BPDU packets that are received by Cisco Nexus 1000V Series Switches are dropped.

C.

The Cisco Nexus 1000V Series uses a simple technique to prevent loops. Like a physical Ethernet switch, the Cisco Nexus 1000V Series Switch performs source and destination MAC address lookups to make forwarding decisions. The VEM applies loop- prevention logic to every incoming packet on Ethernet interfaces.

D.

The Cisco Nexus 1000V Series uses a simple technique to prevent loops. Like any logical Ethernet switch, the Cisco Nexus 1000V Series Switch performs source and destination MAC address lookups to make forwarding decisions. The VEM applies loop- prevention logic to every incoming packet on Ethernet interfaces.

E.

Because the Cisco Nexus 1000V Series participates in Spanning Tree Protocol, it responds to BPDU packets, and it generate them. BPDU packets that are received by Cisco Nexus 1000V Series Switches are dropped.

 

Correct Answer: ABC

 

 

QUESTION 298

Which two options correctly display IOM-to-Fabric Interconnect connectivity? (Choose two.)

 

A.

clip_image006

B.

clip_image008

C.

clip_image010

D.

clip_image012

 

Correct Answer: AB

 

 

QUESTION 299

What are the two FEX connection modes? (Choose two.)

 

A.

hard-pinning mode

B.

soft-pinning mode

C.

port channel mode

D.

physical-pinning mode

E.

vlan pinning mode

 

Correct Answer: AC

 

 

QUESTION 300

What is the default burst in a LAN QoS policy?

 

A.

10240

B.

9216

C.

20480

D.

1548

 

Correct Answer: A

 

Free VCE & PDF File for Cisco 350-080 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …