[Free] Download New Updated (February 2016) Cisco 210-065 Practice Tests 31-40

Ensurepass

QUESTION 31

What do you call the process when one bridge calls into another bridge so that participants on both bridges can see and hear each other?

 

A.

traversing

B.

interworking

C.

flowing

D.

cascading

 

Correct Answer: D

 

 

QUESTION 32

The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence C-Series codec. Manag
ement wants to reverse the effects of this command. Which two methods could be used for this purpose? (Choose two.)

 

A.

From the touch screen, disable FIPS mode in the Administrator Settings menu.

B.

From the touch screen, perform a factory reset from the Administrator Settings menu.

C.

From the touch screen, disable all security settings from the Administrator Settings menu.

D.

Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command.

E.

Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command.

F.

Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.

 

Correct Answer: BF

 

 

QUESTION 33

The user of a Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Which control device and function is used to control the far-end camera?

 

A.

Navigate using the TRC5 Remote Control arrow keys.

B.

Tap on the image of one of the participants using touch control.

C.

Use the Touch Control Conference functions.

D.

Use the TRC5 Remote Control home key.

 

Correct Answer: B

 

 

QUESTION 34

An engineer wants to stream Cisco TelePresence high-definition video to another location. The stream must be connected to an HDMI input on a display. Which two components, at minimum, are required to provide this functionality? (Choose two.)

 

A.

Cisco Media Experience Engine 3500

B.

Cisco TelePresence Content Server

C.

Cisco Digital Media Player

D.

Cisco Digital Media Manager

E.

Cisco TelePresence Server

 

Correct Answer: BC

 

 

QUESTION 35

To which Ethernet port on a Cisco TelePresence System (500/1×00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup?

 

A.

IP phone port

B.

network port

C.

camera port

D.

auxiliary network port

 

Correct Answer: D

 

 

QUESTION 36

A new Cisco TelePresence MCU 5300 is being installed. The customer requested a static IP address to be configured on this device. Which two methods address this request? (Choose two.)

 

A.

From the MCU console, issue the command set static ip-address netmask default- gateway.

B.

From the MCU console, issue the command xconfigure interface:1 static ip-address netmask.

C.

From the MCU console, issue the command static A ip-address netmask default- gateway.

D.

From the web interface, use the Network > Port A menu options.

E.

From the web interface, use the Settings > Interface menu options.

 

Correct Answer: CD

 

 

QUESTION 37

An important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which page would be a good place to start for troubleshooting the issue on the affected endpoint?

 

A.

clip_image002

B.

clip_image004

C.

clip_image006

D.

clip_image008

 

Correct Answer: A

 

 

 

QUESTION 38

In this item, you will need to use all information presented to you to successfully answer the question.

 

clip_image010

clip_image012

clip_image013

 

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

 

A.

The subnet mask on the codec is incorrect.

B.

The ip address of the codec is incorrect.

C.

The interface that the codec is in is in the wrong VLAN.

D.

The codec did not receive a DHCP address from the DHCP server.

 

Correct Answer: A

Explanation:

The subnet mask configured on the codec is 255.255.255.128, when it should be 255.255.255.0.

 

 

QUESTION 39

When you are on a call that is hosted on a Cisco TelePresence MCU, which function is enabled when you enter the numeric sequence *6?

 

A.

request the floor

B.

mute/unmute audio

C.

merge another call

D.

cycle layout options

Correct Answer: B

 

 

QUESTION 40

Refer to the exhibit. An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. Which log entry explains the reason for the call failure?

 

clip_image015

 

A.

INFO Packet loss detected: 100% loss – no media stream received in the last 10 seconds

B.

INFO Jitter buffers increased

C.

INFO admin CLI login from 10.160.134.15:51151

D.

INFO Main Video stream packet loss detected on the center codec

 

Correct Answer: A

 

Free VCE & PDF File for Cisco 210-065 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …