Latest CCNP Voice 642-447 Real Exam Download Topic 7, Miscellaneous Part 01

Ensurepass

QUESTION 153

What are three goals of subscriber?

 

A.      Writebale databse

B.      Place the data to COR

C.      Provides call forwarding D. Place the data to CDR

D.      Provides call processing

E.       Provides Admin Rights

F.       Read only database

 

Answer: D,E,G 

 

 

QUESTION 154

What process does the Log Partition Monitor use to delete logs in excess of the high-water mark?

 

A.      If any log files exist in the inactive partition, those files are deleted first, then the oldest files in the active partition are deleted until the low-water mark is reached.

B.      The oldest files in the active partition are deleted until the low-water mark is reached.

C.      If any log files exist in the inactive partition, those files are moved off to an SFTP server and then the oldest files in the active partition are moved off to an SFTP server until the low-water mark is reached.

D.      The log files in the inactive partition are deleted first and then the oldest files in the active partition are moved off to an SFTP server until the low-water mark is reached.

 

Answer: A 

 

 

QUESTION 155

Which two methods can be used to build a SIP trunk from the Cisco Unified CallManager to a SIP Registrar server and a backup Registrar server? (Choose two.)

 

A.      Configure one SIP trunk to point to the SIP Registrar server and a second SIP trunk to point to the backup Registrar server. Use route groups and a route list to allow calls to be routed to the backup Registrar if the primary does not respond.

B.      Add the SIP Registrar server and the backup Registrar server to the Device Pool assigned to the SIP trunk.

C.      Configure a DNS SRV record name as the destination address of the SIP trunk.

D.      Configure only the SIP Registrar Server in the SIP trunk; The UA message will include the IP address of the backup SIP trunk if the call cannot be set up by the SIP Registrar server.

E.       Configure the IP address of the SIP Registrar server as the first destination address of the trunk and the IP address of the backup Registrar server as the second destination address.

 

Answer: A,C 

 

 

QUESTION 156 DRAG DROP

You work as a network technician at Abc.com. Your boss, Miss ABC, is interested in Cisco Services.

Match the proper Cisco Service term with appropriate function.

clip_image002

Answer:  

clip_image004

 

 

QUESTION 157 DRAG DROP

You work as a network technician at Abc.com. Your boss, Miss ABC, is interested in Presence terms. Match the proper Presence term with appropriate description.

clip_image006

Answer:

clip_image008

 

 

QUESTION 158

What is the difference between a CMR and a CDR?

 

A.      A CMR is accessed by SOAP and a CDR is accessed by the Cisco Unified CallManager CAR tool.

B.      A CMR is a set of preconfigured management reports that filter CDR information.

C.      A CMR record can be sent directly to third party applications while CDR records are only sent to the Cisco Unified CallManager CAR tool.

D.      A CMR reports on call quality and CDR reports on call activities.

 

Answer: D 

 

 

QUESTION 159

You need to configure a new IOS-based Catalyst switch to support voice and data VLANs. The data VLAN will be VLAN 10 and the voice VLAN will be VLAN 100. Which of the following configurations should be used to support these VLANs while also allowing switch port 0/1 to enter the forwarding state immediately?

 

A.      R 1(config)# interface FastEthernet 0/1

R 1(config-if)# switchport mode trunk

R 1(config-if)# switchport access vlan 10

R 1(config-if)# switchport aux vlan 100

R 1(config-if)# spanning-tree port-priority

 

B.      R 1(config)# interface FastEthernet 0/1

R 1(config-if)# switchport mode access

R 1(config-if)# switchport native vlan 10

R 1(config-if)# switchport aux vlan 100

R 1(config-if)# spanning-tree portfast bpdu filter default

 

C.      R 1(config)# interface FastEthernet 0/1

R 1(config-if)# switchport mode trunk

R 1(config-if)# switchport native vlan 10

R 1(config-if)# switchport voice vlan 100

R 1(config-if)# spanning-tree portfast

 

D.      R 1(config)# interface FastEthernet 0/1

R 1(config-if)# switchport mode access

R 1(config-if)# switchport access vlan 10

R 1(config-if)# switchport voice vlan 100

R 1(config-if)# spanning-tree portfast

 

Answer: D 

 

 

QUESTION 160

How can the activation status of DNS services be changed?

 

A.      DNS activation can only be changed by reinstalling Cisco Unified CallManager.

B.      DNS activation can be changed at any time.

C.      DNS activation is on by default and can only be turned off at installation; once DNS activation has been turned off, the system must be reinstalled to turn it back on.

D.      DNS activation is on by default and cannot be changed, but leaving the DNS server addresses and domain name blank disables the service.

 

Answer: A

 

 

QUESTION 161

You have recently upgraded to a Cisco Unified CallManager 5.0 cluster. What will happen to users added alter the upgrade if you roll back to the inactive partition?

 

A.      The user database for the active partition will need to be synchronized with the inactive partition after the inactive partition becomes active to add the new users.

B.      The active partition maintains a backup copy of the user database that is used when the inactive partition is activated.

C.      User information will be lost and those users added after the upgrade will need to be reentered.

D.      The two partitions share a common database. When the inactive partition becomes active, users will already be populated.

 

Answer: C 

 

 

QUESTION 162

What happens by default if the Log Partition Monitor’s high-water mark is exceeded?

 

A.      An alert is sent to RTMT Alert Central and log files are purged until the low-water mark is reached.

B.      An e-mail alert is sent to the administrator and logs are purged, starting with those in the inactive partition and followed by the oldest files in the active partition, until the low-water mark is reached.

C.      An alarm message is sent to the syslog, an alert is generated in RTMT Alert Central, and log files are purged until the low-water mark is reached.

D.      An e-mail alert is sent to alert the administrator and the system starts to purge log files starting with the oldest first.

 

Answer: C 

 

 

Download Latest CCNP 642-447 Real Free Tests , help you to pass exam 100%.

Leave a Reply