What would be the cause for the following fault in UCS Manager?
“ether VIF x / xxx down, reason: ENM source pinning failed”
A. The associated VLANs of a vNIC are not found on an uplink.
B. Overlapping VLAN IDs exist on upstream disjoint networks.
C. The vNIC was not configured for fabric failover.
D. The vNIC is pinned to the wrong fabric.
E. Overlapping VSAN IDs exist on upstream SAN switches.
F. The vHBA was not configured for failover.
Correct Answer: A
Which three statements are possible causes for the “fltAdaptorHostIfLink-down” fault in UCS Manager? (Choose three.)
A. The fabric interconnect is in the end-host mode, and all uplink ports have failed.
B. The server port to which the adapter is pinned has failed.
C. A transient error has caused the link to fail.
D. The fabric interconnect is in the switch mode, and all uplink ports have failed.
E. The link for a network-facing host interface is missing.
Correct Answer: ABC
On a Cisco Unified Computing System (UCS), which two statements regarding Ethanalyzer are true? (Choose two.)
A. Interface inbound-low handles Rx and Tx of low-priority control packet.
B. Interface inbound-lo handles Rx and Tx of high-priority control packet.
C. Interface inbound-low maps to internal interface eth3.
D. Interface inbound-low maps to internal interface eth4.
Correct Answer: AC
Which statements are true regarding the Cisco UCS fabric failover feature? (Choose three.)
A. FabricSync is used to synchronize MAC addresses to an adjacent fabric interconnect after a server interface failover.
B. Gratuitous ARPs are sent on fabric interconnect uplinks after a server interface failover.
C. Fabric failover can be used on vNICs and vHBAs.
D. Fabric failover is configured as part of the service profile.
E. Fabric interconnects in end-host mode use fabric failover instead of spanning tree to provide redundancy on uplink ports.
Correct Answer: ABD
Refer to the exhibit. If uplink 1 fails, to which addresses will Fabric Interconnect B transmit a GARP on Uplink 2?
A. AA and BB only.
B. C1 and C2 only.
C. A1, B1, AA, and BB.
D. AA, BB, C1, and C2.
E. No GARPs will be transmitted.
Correct Answer: D
A Cisco UCS fabric interconnect in end-host mode learns MAC addresses on which port types? (Choose four.)
A. Uplink Ethernet ports or border ports.
B. Appliance ports.
C. Server ports.
D. Fabric ports.
E. Backplane ports.
F. vEth interfaces.
G. A Fabric Interconnect doesn’t learn MAC addresses in End Host mode.
Pinning is used instead.
Correct Answer: BCEF
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager? (Choose three.)
A. Cisco UCS Manager 1.3(xx) or later and a pair of Nexus 2248 FEXes.
B. Cisco UCS Manager 2.0(2xx) or later and a pair of Nexus 2232 FEXes.
C. Two Cisco UCS 6100 Series or 6200 Series fabric interconnects.
D. Two RJ45 Ethernet cables.
E. The fabric interconnects must be in end-host mode.
Correct Answer: BCD
Refer to the exhibit. All Ethernet ports are trunked with VLANs 2 thru 10. The Cisco UCS domain is in end-host mode. Host A transmits a single broadcast frame on VLAN 4. Which statements are true? (Choose two.)
A. Nexus 5548 A and Nexus 5548 B send a copy of the broadcast frame down all six ports to
A. Fabric Interconnect A and Fabric Interconnect B.
B. The deja vu mechanism on the fabric interconnects prevents the fabric interconnects from receiving multiple copies of the broadcast frame.
C. All four vNICs receive a single copy of the broadcast frame.
D. All four vNICs receive multiple copies of the broadcast frame on VLAN 4 but no broadcasts on any other VLAN.
E. The spanning tree process prevents the vNICs from receiving multiple copies of the broadcast frame.
F. The Reverse Path Forwarding mechanism prevents the vNICs from receiving multiple copies of the broadcast frame.
Correct Answer: AC
Refer to the exhibit. Fabric Interconnect A, operating in end-host mode, receives an ingress frame with source MAC address 0025.b500.0035 on uplink Eth1/19. Which statements are true? (Choose two.)
A. The frame will be accepted. Fabric Interconnect A will update its MAC address table to show that 0025.b500.0035 is dynamically learned on Eth1/19 and no longer dynamically learned on Eth5/1/6.
B. Fabric Interconnect A will transmit a Gratuitous ARP for 0025.b500.0035 since it has moved ports, and the upstream network needs to be notified of the new location.
C. Fabric Interconnect A will drop the frame.
D. The MAC address table will not be updated as a result of receiving this frame on an uplink.
E. Reverse Path Forwarding will determine whether or not this frame is dropped by Fabric Interconnect A.
F. Deja vu will determine whether or not this frame is dropped by Fabric Interconnect A.
Correct Answer: CD
Refer to the exhibit. Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in the provided exhibit. Which Cisco UCS components will meet the requirement? (Choose three.)
A. Cisco UCS 6148, Cisco UCS 6248UP, or the Cisco UCS 6296UP fabric interconnects.
B. Cisco UCS 2104XP Fabric Extender.
C. Cisco UCS 2204XP or 2208XP Fabric Extenders.
D. Cisco UCS M81KR Virtual Interface Card.
E. Cisco UCS Virtual Interface Card 1280.
F. Cisco UCS Virtual Interface Card 1240 with a port expander.
Correct Answer: AEF
Download Latest Complete Collection of CCIE Data Center 350-080 Real Exam,pass exam 100%.
Try CCIE Data Center 350-080 Free Demo
Ensurepass Cisco Certifications Exam Questions and Answers
Ensurepass CCIE Data Center Exams Questions and Answers